The D-Handle MK2 fitted to the rear of a Festool Domino DF 500 Q, embossed "Motam Woodworks Domino DF500"

Festool Domino DF500 - D-Handle MK2

from £16.00

Makita compact router with the Motam Woodworks base and handle, resting on a Festool guide rail

Makita RT0700/DRT50Z/Katsu Router Base Track Guide Bush Rail Adaptor

from £22.00

View Options

Festool OF1400 router fitted with the Motam Woodworks base and handle, resting on a Festool guide rail

Festool OF1400 Router Base Track Guide Rail Adaptor

from £26.00

View Options

Motam Woodworks router base and handle fitted to a Dewalt DW625 router, mounted on a Dewalt guide rail

Dewalt DW625 router with the Motam Woodworks base and handle attached, resting on a Dewalt guide rail

Dewalt DW625 Router Base Track Guide Rail Adaptor

from £26.00

View Options

Motam Woodworks DF500 fence and handle mounted on a Festool Domino, with both 1mm/3mm/6mm shim sets laid out beside it

Close-up of the Motam Woodworks DF500 fence and handle assembly on a Festool Domino DF500

Festool Domino DF500 Large Fence Offset System

from £32.00

View Options

Lamello Zeta P2 fitted with the Motam Woodworks guide rail adaptor and handle, mounted on a Makita guide rail

Close-up of the Motam Woodworks fence adaptor and handle attached to the Lamello Zeta P2

Lamello Zeta P2 - Guide Rail Track Adaptor

from £22.00

View Options

Three guide rail adaptor plates for Bosch-Mafell, Festool, and Makita stacked together

Motam Woodworks Makita rail adaptor fitted onto a Makita guide rail

Guide Rail System Parts

from £9.00

A Festool Domino DF500 held in its mount, embossed "Motam Woodworks DF500," fitted to an MFT table

The Festool MFT Bracket base plate, unmounted

Festool MFT Modular Mounting System

from £19.99

A Mirka DEROS 650 sander held in the 150mm sander mount, fitted to an MFT table's T-track

Benchdog Ultra MFT Modular Mounting System

from £19.99

The Domino DF500 mount, embossed "Motam Woodworks DF500," fitted into an MFT table's T-track

The Small Tray mount holding screws, drill bits, and a countersink bit

MFT Modular Mounting System - Spare Parts

from £12.99

A black door stop screwed into place at the base of a cupboard door, against a white cabinet interior

Adjustable Cupboard Door Stops for Inset Doors

from £13.50

View Options

The spline jig fitted to a Festool Domino DF 500, with the depth stop gauge mounted alongside

The spline jig fitted to a Lamello Zeta P2, with the P-System dial visible

Spline Jig - Festool Domino DF 500 & Lamello Zeta P2

£20.00

The green stepped depth gauge fitted to a Festool Domino DF500, labelled 12, 15, 18, 19, 22, 25, 36mm

Festool Domino DF500 - Precision Depth Stop Thickness Gauge - Metric - UK/EU Sizes

from £10.00

A Bessey K-Body REVO clamp with several Motam Woodworks Glue Guards fitted on the bar, more laid out beside it in a workshop

Close-up of a Bessey K-Body REVO clamp bar with two Glue Guard sections snapped in place, embossed "Motam Woodworks Glue Guard"

Glue Guard – Bessey K-Body REVO Clamp Bar Protection

from £20.00

A Bessey K-Body REVO clamp beside eight black bar protection clips laid out on a workbench

Close-up of a single bar protection clip, showing the channel that fits over the clamp bar

Bessey K Body Parallel Clamps - Bar Protection Clip (Pack of 8)

£18.00

The dust adaptor mounted on a UJK Drill Guide with a Numatic vacuum hose connected

The dust adaptor mounted on a UJK Drill Guide with a Festool vacuum hose connected

UJK Drill Guide - Dust Vacuum Extractor Adaptor

from £14.00

Close-up of a single white keyhole bracket, showing the keyhole slot shape and ribbed sides

Festool Domino Keyhole Picture, Frame, Artwork Hanger Mounting Brackets

£12.50

Five sample dust extraction adaptors of different sizes, some straight and some tapered between two diameters, laid out on a workbench

Diagram showing how to measure a custom adaptor, labelled A-End, B-End, A End Height, and B End Height

Custom Size Vacuum Dust Extraction Adaptor For Power tools & Workshop Machines

from £16.00

An unmounted wall mount bracket embossed "Motam Woodworks" and "Festool 27mm Hose"

An empty wall mount bracket mounted on a workbench corner, embossed "Custom Name"

Vacuum Hose Storage Wall Hook Bracket Mount

£15.00

A Bench Dogs T-square and three Bahco combination squares of decreasing size, each fitted with wall mount brackets

Three Bahco combination squares of decreasing size, each held by a pair of wall mount brackets, laid flat on a workbench

Wall Mount Brackets For Woodworking Combination & Carpenter Squares (x10)

£10.00

Two cable wall hooks screwed to the underside of a workbench, each holding a coiled power cable

Close-up of a single empty cable wall hook, showing the oval cable slot and mounting screw hole

Power Cable Storage Wall Hook Mount Bracket - Set of 4

£12.00

An empty 150mm wall mount bracket with an integrated cable hook, embossed "Motam Woodworks 150mm"

The 150mm bracket holding a stack of sanding discs, with the sander's mains cable coiled on the integrated cable hook below

Ultimate 3 in 1 Orbital Sander Wall Mount Bracket Holder

£16.00

An empty 150mm wall mount bracket, embossed "Motam Woodworks 150mm"

Several Motam sander wall mount brackets installed on a workshop wall board, holding a Mirka DEROS sander and two other sanders alongside stacks of sanding discs

2 in 1 Orbital Sander Wall Mount Bracket Holder

£14.50

The Motam edge guide fitted to a Mirka DEROS sander, sanding the edge of a striped wooden board

The edge guide disassembled, showing the felt-padded body, curved mounting bracket, and two screws

Mirka Deos Deros 90 Degree Right Angle Edge Sander Guide

£30.00

The Motam edge guide fitted to a Festool ETS EC sander, sanding the edge of a wooden board

The Motam edge guide fitted to a Festool Rotex RO 150 FEQ sander

Festool ETS EC - ETS - Rotex - 150mm 90 Degree Right Angle Edge Sander Guide

from £35.00

A roll of sandpaper loaded into the Motam Woodworks sandpaper roll storage bracket, mounted against a branded workshop backdrop

The Motam Woodworks sandpaper roll storage bracket on its own, showing the cutting blade

Sand Paper Roll Storage - Wall Mount Bracket

£28.00

Four tiers of the Motam sanding disc holder stacked and loaded with 120, 100, 80, and 60 grit orbital sanding discs

A single 120-grit tray from the sanding disc holder, showing the hexagonal lattice base and embossed grit label

Sanding Disc Holder - Wall Mountable Orbital Sandpaper Storage Rack

from £30.00

View Options

The Motam 90-degree edge guide fitted to a Dewalt DWE6423 sander, sanding the edge of a wooden board

The edge guide disassembled, showing the main body with its felt contact pad, mounting screws, and a curved bracket piece

Dewalt DWE6423 125mm - 90 Degree Right Angle Edge Sander Guide

£28.00

Motam Woodworks Standard knife sharpening jig mounted on the Robert Sorby ProEdge

Motam Woodworks Standard knife sharpening jig mounted on the Robert Sorby ProEdge with a knife being sharpened

Robert Sorby ProEdge Knife Sharpening Jig

from £14.50

View Options

Motam woodworks dust extraction adaptor for the Robert Sorby ProEdge sharpening machine, with an Festool 27mm adaptor

Motam woodworks dust extraction adaptor for the Robert Sorby ProEdge sharpening machine, with a removable vacuum hose adaptor

Robert Sorby ProEdge Dust Vacuum Extractor Adaptor

from £16.00

A drill bit held against the sanding belt on the Robert Sorby ProEdge system, guided by the Motam woodworks drill bit jig

Close-up of the Motam woodworks drill bit jig mounted on the ProEdge system, showing its angled guide face

Robert Sorby ProEdge Drill Bit Sharpening Jig

from £13.00

Close-up of the square guide jig mounted on the ProEdge machine from a different angle, showing the fit against the backplate

Close-up of the Motam Woodworks square guide jig mounted on the Robert Sorby ProEdge sharpening machine, holding a chisel blade against the sanding belt

Robert Sorby ProEdge Woodworkers Square Guide Jig - Short Base

£13.00

Skew chisel being sharpened on Robery Sorby ProEdge belt sander, using Motam Woodworks skew chisel jig set to one of its 20/25/30 degree positions

Close-up of the Motam skew chisel jig mounted on the Robert Sorby ProEdge system, showing the 20°, 25°, and 30° angle-setting points

Robert Sorby ProEdge Woodturners Skew Chisel Jig Guide

£20.00

3D Workshop & Tool Accessories

3D Workshop & Tool Accessories

Filters

Filters

No results found

Product Guides

Delivery Information

Contact Us:

Info@motam.co.uk