Festool ETS EC 150mm 90 Degree Right Angle Edge Sanding Guide
Motam Woodworks 3D Printed - Festool ETS EC 150mm 90 Degree Right Angle Edge Sanding Guide
Upgrade your sanding experience with our 3D Printed 90-Degree Edge Guide, designed specifically for Festool sanders.
This key benefits of this jig:
1) The ability to sand narrow edges to a 90 degree angle
2) Felt surface to protect the work piece
3) Easy to setup using the two screws provided
4) Durable while also keeping the weight to a minimum
Design is based on the Festool ETS EC 150mm (5mm) it should also work for the 3mm.
What you get:
1x 90 Degree Edge Sanding Guide
2x Screws
Instructions:
1) Hand-tighten the jig onto the sander
2) Place a precision square tool on the sand pad/jig as a reference guide (see photo for reference)
3) Adjust the jig until it aligns perfectly with the square
4) Tighten the bolts firmly to lock the component in its squared position
5) Perform a final squareness check to confirm accurate alignment
Sander Not Included.
Colour may vary depending on stock.
This is a 3D printed product so cosmetic imperfections may be present, this does not effect the functionality.