- 3D
- >
- Sanding Accessories
- >
- Mirka Deos Deros 90 Degree Right Angle Edge Sanding Guide
Mirka Deos Deros 90 Degree Right Angle Edge Sanding Guide
Motam Woodworks 3D Printed - Mirka Deos Deros 90 Degree Right Angle Edge Sanding Guide
Upgrade your sanding experience with our 3D Printed 90-Degree Edge Guide, designed specifically for Mirka sanders.
This key benefits of this jig:
1) The ability to sand narrow edges to a 90 degree angle
2) Felt surface to protect the work piece
3) Easy to setup using the two screws provided
4) Durable while also keeping the weight to a minimum
Two versions Available:
- Deros 5650 & 650 - Designed for the 150mm pad
- Deos 353 - Designed for the Mirka pad sander (81x133)
What you get:
1x 90 Degree Edge Sanding Guide
2x Screws
Instructions:
1) Hand-tighten the jig onto the sander
2) Place a precision square tool on the sand pad/jig as a reference guide (see photo for reference)
3) Adjust the jig until it aligns perfectly with the square
4) Tighten the bolts firmly to lock the component in its squared position
5) Perform a final squareness check to confirm accurate alignment
Sander Not Included.
Colour may vary depending on stock.
This is a 3D printed product so cosmetic imperfections may be present, this does not effect the functionality.